Hydrokit 4.1 [free]

Beschrijving

Hydrokit The application allows to identify very intuitive way all types of hydraulic fittings.
Defining your connectivity becomes a breeze.
The simple and intuitive process helps you in only 3 steps to define a connection by shape, size, type sealing and thread.
Once these three steps are completed, the application automatically generates the reference hydraulic fitting.
You can contact us for availability and price.
It can be set straight unions males, females, equal, reducing, passes partition; adapters; of male elbows, females, 90 ° or 45 °, pass partition; of males tees, female,
reversed, turning passes partition; equal cross.
The application also allows to easily calculate all the hydraulic pumps parameters, hydraulic motors, hydraulic cylinders, hydraulic pressure drops.
Enter the values, the results are calculated automatically.
• For the calculation of hydraulic pumps:
You can go either:
1. the engine parameters, the volumetric efficiency of rotational speed and mechanical pressure. The calculator gives you the actual and theoretical speed, the required drive
power and total system performance.
2. The rate parameter desired rotational speed, the volumetric efficiency and mechanical and pressure. The calculator gives you the real and theoretical engine, the drive power
and total system performance.
• For the calculation of hydraulic motors:
You can go either:
1. the engine parameters, the volumetric efficiency of rotational speed and mechanical pressure. The calculator gives you the necessary speed, the drive power, torque generated
and the total system performance.
2. The available rate parameter and the desired rotational speed, the volumetric efficiency and mechanical and desired torque. The calculator gives you the engine and the
necessary pressure and the total system performance.
• For the calculation of hydraulic cylinders:
You can go either:
1. piston diameter settings, stem, running, strength and time of desired movement. The calculator gives you the rod side surfaces, piston and differential volumes side rod,
piston and differential, the next rod and piston pressures, the travel time, the linear velocity and the surface ratio.
2. piston diameter settings, stem, stroke, pressure and flow available. The calculator gives you the rod side surfaces, piston and differential volumes side rod, piston and
differential forces side rod and generated piston, the travel time, the line speed, the area ratio and the return rates of the cylinder .
• For calculation of losses:
You return the oil flow inside diameter and length of the pipeline viscosity and specific gravity of the fluid. The calculator gives you the speed of the fluid the number of
Reynolds, an indication if the plan is laminar or turbulent and loss of load bar.
The application also allows for conversions from the most common hydraulic units:
- Pressure (bar, psi, MPa)
- Power (hp kW kcal / h)
- Length (mm, inch, ft)
- Volume (liters, US gallon, imperial gallon, cm3, inch3)
- Temperature (° C, ° F, ° K)
- Flow (L / min, US gallon / min, Imperial gallons / min cm 3 / s, in3 / min)
- Speed ​​(km / h, m / s, in / min)

Oude Versies

Free Download Download door QR Code
  • Applicatie Naam: Hydrokit
  • Categorieën: Zakelijk
  • App Code: com.app.hydrokit
  • Nieuwste versie: 4.1
  • eis: 4.1 of hoger
  • bestand Grootte : 33.67 MB
  • Werk tijd: 2022-09-27